Impact the Clubface to Control It
The face of your club should be square at impact, no matter how well you swing. The most important aspect of your swing is the club face, which should be vertical at impact. Even though you may have the ideal swing, if your club face isn’t vertical at impact, you’re in for a difficult round. Simply said, you may become a really steady golfer if you can square up the face.
If you want to conceal lower scores, you’ll need to have a consistent swing. You may give yourself many opportunities to shoot your best rounds if you can combine a strong short game with good shot making. But if you don’t have a consistent swing, it’ll be difficult for you to capitalize on your strengths. So work diligently on perfecting a square clubface at impact, and your game will improve by leaps and bounds.
A lot of novices aim to make lower scores, but many overlook something as simple as the face at impact. The swing path and alignment are simple concepts to grasp, but the ball’s start is determined by the clubface at impact.
Here’s how you can improve your game and generate some of the finest shots yet by learning to square the clubface correctly:
The Best Way to Deal with the Clubface at Impact
There are a few things you can do to help control the clubface at impact. First, make sure you’re using a club that’s appropriate for your ability. If you’re a beginner, you shouldn’t be using a driver, for example. Start out with some easier clubs and work your way up.
Another thing you can do is to focus on your grip. Your grip should be firm but not too tight, and you should make sure that your hands are in the correct position on the club.
You can also try using a training aid to help you with this. There are a few different aids on the market that can help you square the clubface at impact.
Find one that you’re comfortable with and use it to help improve your swing.
To get started, check your grip
The first aspect to consider when attempting to straighten up the club face is your grip. Begin by analyzing the way you use your left hand.
Is your grip positioned correctly? Is it too thin, too thick, or precisely perfect with your fingers wrapped around the club? The most typical mistake golfers make is to hold the club with their hand, rather than their fingers. This gives them a death grip on the club and doesn’t allow for proper finger movement.
As you can see, your left hand should be positioned below your right when you’re gripping the club. Your thumb should also be in line with your forefinger, not wrapped around it. This will give you a more comfortable grip that will allow you to make a smoother swing.
Now let’s take a look at the right hand. The most common error here is to grip the club too tightly. Remember, you want to have a strong grip, but not one that will cause your muscles to tense up.
Do you think your wrists are rolling?
Yes, you are rolling your wrists. When you do this, you lose control of the clubface and it becomes difficult to hit the ball squarely. You’ll want to focus on keeping your wrists straight through the entire swing. This will help you maintain better control of the club and ensure that your shots are more accurate.
How to Correct a Clubface Problem on the Downswing?
The most crucial thing to check for on your downswing is what and how the clubface is doing. Even if all of these initial two variables are correct, the downswing clubface position may be lost. This is simple to do, resulting in more misses and lower scores on the course.
There are a few things to keep in mind when you’re checking your clubface on the downswing. First, make sure that you’re not gripping the club too tightly with your right hand. This will cause you to tense up and lose control of the clubface. Second, focus on keeping your elbows close to your body. This will help you maintain the correct clubface position.
Creating a Clubface Awareness Strategy Is Simple
It might be difficult for novices to grasp at first. Here’s a graphic representation to consider squaring up the clubface.
- Assume a normal grip and aim at a ball teed up on the range with your driver.
- Raise your clubface until it’s in line with the top of your stance. The shaft should be facing down and parallel to the ground (not perpendicular). Do you see how your palm mirrors the clubface angle?
- From this position, simply rotate your grip forward until the clubface is pointing at the ball. It’s like you’re screwing in a light bulb. The key is maintaining that Palm-up/palm-down relationship between your left hand and the clubface.
- When you strike, your palm should turn 180 degrees and return to its original square position. This simple illustration may serve as a reminder that the correct palm is a mirror image of the clubface.
- Repeat this drill several times to begin to grasp the relationship between your hand and clubface.
How to Keep the Clubface Square When Playing Golf?
But there are times when you don’t feel like looking at spreadsheets or data. I provide actual examples here to help you square the clubface consistently, both in terms of swing and stance.
These instructions can help you work out even harder on the practice tee by providing some of the most effective workouts for you to follow.
Drill : The Half Swing
This drill is a fantastic method to teach yourself how to square the clubface when you’re on the range again.
Position yourself as if you were going to hit a full shot. Take the club back halfway and then stop. From this position, check to see where your clubface is pointing. It should be aimed directly at the target. If it’s not, make the necessary adjustments until it is.
You want to work as little as possible and retain approximately 50-75 percent of the club’s energy. The objective isn’t to hit the ball a long way; it’s to teach your body to minimize clubhead movement.
- Take a look at the club face on the return trip to ensure that it hasn’t moved overly far. You want your hands to be about halfway inside and halfway shut.
- Swing the club all the way to the top and then back down to the halfway position. Remember, you’re only working with 50-75 percent power here. The point is to groove your takeaway and your release without worrying about hitting the ball a long way.
- As you get more comfortable with this drill, you can start adding power while still maintaining control of the clubface.
Drill : Clubface Control
Maggs Golf’s has another fantastic drill. Golfers are aware that they must compact the golf ball in order to hit it correctly, but they frequently have difficulties doing so. And this is extremely important, as it affects a large number of individuals.
Because it necessitates lining up the clubface and having your hands ahead of the ball, this shot is tough to execute. Some golfers will leave the face open when they try to square the clubface and aim for the ball, which will result in a birdie if successful. Most golfers become irritated, overcompensate, and begin aiming the clubface to the right of the target after several misses.
This drill is designed to teach you how to square the clubface while also keeping your hands ahead of the ball. It will help you develop a feel for where the sweet spot is on the clubface.
Drills For Striking The Ball
- To ensure that you hit the ball straight, set up a tee two feet behind it and an alignment rod to establish your position straight.
- Grasp the hosel of the club with your right hand and hold it against your left side. Locate a tee and an alignment rod about two feet behind the ball. Set up straight with the tee at your back. Take a few practice swings, ensuring that you brush the tee on the backswing and follow through.
- Check your grip to make sure your palms are facing each other and then take your stance. Again, ensure that you have good posture and that the club is parallel to your feet.
- If you find it difficult to keep the clubface square with the clubhead, you can use a headcover or a glove to help you. Simply place it over the top of the club and make sure that it’s touching the ground.
- This drill should help you develop a feel for where the sweet spot is on the clubface. It will also teach you how to square the clubface at impact.
On the downswing, a golf club’s unwind is another frequent blunder. When gamers try to rip it instead of starting with their upper body rather than their lower body, this occurs. The chair drill is designed to help golfers keep their backswing and downswing in sync with each other.
For this drill, you will need a golf club and a chair. Position the chair directly behind the ball and set up as if you were going to hit a shot.
As you take the club back, place your left hand on your right thigh and your right hand on the back of the chair. On the downswing, you want to push off your right leg and extend your left arm as you shift your weight forward. This will help you keep your backswing and downswing in sync with each other.
How to Maintain Clubface Control For Accuracy Drilling?
- To control the clubface for accuracy, you’ll need to practice the drills mentioned above. These drills will help you develop a feel for where the sweet spot is on the clubface, and how to square the clubface at impact.
- Make sure that you take your time and practice these drills regularly. The more comfortable you become with them, the better your chances of success will be on the golf course.
- Remember, accuracy is key in golf. If you can control the clubface and hit the ball where you’re aiming, you’ll be well on your way to shooting lower scores.
If you want to improve your score, the first thing you should do is get better acquainted with the clubface. If you can establish good contact with the ball at impact, it will usually square the clubface, you’ll have a greater degree of confidence in your swing and will be able to hit it cleanly, avoiding the significant miss that ruins your good rounds.
Use the drills provided in this article to help you get a feel for how to control the clubface, and soon you’ll be hitting more fairways and greens than ever before.
Thanks for reading! I hope this article was helpful. If you have any questions, please feel free to leave a comment below. I’ll be happy to help in any way that I can.